Clever!
| WorldWorksGames http://worldworksgames.com/forum/ |
|
| First Light transparencies TLX'd http://worldworksgames.com/forum/viewtopic.php?f=19&t=9816 |
Page 1 of 1 |
| Author: | Akmor [ 06-13-2011, 09:22 AM ] |
| Post subject: | First Light transparencies TLX'd |
Quite an easy bash to do: just print the transparency page from First light retrofit at 116% (so that the panel are 2 " high). Then use a 3" wall template to cut , and voila ! The same can be done with 6" or angular walls... |
|
| Author: | Matthew777 [ 06-13-2011, 10:35 AM ] |
| Post subject: | |
| Author: | uncre8d1 [ 06-13-2011, 12:53 PM ] |
| Post subject: | |
Clever!
|
|
| Author: | Nickydude [ 06-13-2011, 01:12 PM ] |
| Post subject: | |
| Author: | Zenguy [ 06-13-2011, 02:52 PM ] |
| Post subject: | Re: First Light transparencies TLX'd |
| Author: | Akmor [ 06-13-2011, 11:47 PM ] |
| Post subject: | |
| Author: | Akmor [ 06-17-2011, 04:38 AM ] |
| Post subject: | |
| Author: | Zenguy [ 06-17-2011, 02:54 PM ] |
| Post subject: | |
| Author: | Andorax [ 06-17-2011, 03:04 PM ] |
| Post subject: | |
| Author: | Zenguy [ 06-17-2011, 03:40 PM ] |
| Post subject: | |
| Author: | Akmor [ 06-18-2011, 06:40 AM ] |
| Post subject: | |
| Author: | Andorax [ 06-18-2011, 11:16 AM ] |
| Post subject: | |
I'll run it by Denny and see what he thinks. The problem is that this would inherently duplicate an element of any full-scale conversion we might look at doing in-house in the future. That's why we're leery of converting old pieces to TLX piecemeal. But he may decide this won't do any harm and run with it. And as for your other questions.... Yes, robocutters can cut transparencies. No, you do not want to use the same layout as the regular walls...there's nothing to be folded over. A transparency cutout page would have to be different, and custom. |
|
| Author: | Akmor [ 06-18-2011, 11:42 PM ] |
| Post subject: | |
| Author: | Lotus [ 06-19-2011, 09:24 AM ] |
| Post subject: | |
Real quick note on the Robocutter file for this. So long as you do not alter the location of the wall sections, you can simply convert all fold lines to cut lines and and you'd be all set, easy-peasy. |
|
| Author: | Akmor [ 06-19-2011, 09:42 AM ] |
| Post subject: | |
| Author: | Akmor [ 06-19-2011, 11:54 AM ] |
| Post subject: | |
Walls submitted, standard height all possible size (at least all possible with current possibilities )
We'll see if this get through |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|